Listed below are the most frequently ordered parts and supplies for this product. The photos and part numbers allow you to quickly identify and order the parts you need via phone, fax, or email. We do not have an online ordering system in place at this time.
In the USA, these parts and supplies can be ordered direct from Teledyne Isco. Contact our Customer Service department for pricing and other details on the part numbers you need: via email to iscoCSR@teledyne.com, toll free (800) 228-4373, or Fax (402) 465-3022. Credit card orders accepted; minimum order is $35.00.
For our international customers, In countries where Teledyne Isco is
represented by an authorized dealer for this product, please
contact your
authorized dealer to obtain pricing and place your order.
In countries where Teledyne isco is NOT represented by an authorized dealer,
contact Isco Customer Service via email to
iscoCSR@teledyne.com, or Fax (402) 465-3022.
If you do not see the items you need, please contact Isco Technical service for assistance: email iscoservice@teledyne.com, fax (402) 465-3001, or phone (402) 465-2410.
| Image | Part Number | Description |
|---|---|---|
| 202907118 | 25g Solid Sample O-Ring |
| 202907424 | 5g Solid Sample O-ring |
| 202907864 | Mixer O-ring. No longer considered a required annual preventative maintenance item. To access this O-ring you must remove the mixing motor & magnet. When reinstalling the mixing motor & magnet call Teledyne-Isco Service for the correct gap distance between the magnet and mixing chamber. |
| 202909023 | Replacement seal for 5g adjustable solid sample cartridge cap. |
| 202909025 | Replacement seals for 25 gram adjustable solid sample cartridge cap |
| 202909049 | 5g Solid Sample Seal |
| 202909092 | 25g Solid Sample Cap Seal |
| 209016319 | 1/8" 2-piece Ferrule |
| 209016320 | 1/8" Black Delrin Nut |
| 209016381 | Inline Check Valve |
| 209016389 | 1/8" Tan, Short Peek Nut |
| 209016415 | Flush nut wrench |
| 209016546 | Stainless steel prime tube |
| 209016904 | Female Luer to 1/4-28 thread |
| 209016910 | 1/8" Swage-Lok Ferrule - Front |
| 209016911 | 1/8" Swage-Lok Ferrule - Back |
| 209017004 | 1/8" Swage-Lok Nut |
| 209017009 | Male Luer to 1/4-28 thread |
| 600923015 | Black Lead Connector Nut |
| 600923017 | 1/8" Ferrule |
| 601843487 | Kalrez disk used in pulse damper. Typically replaced by factory trained technicians. Also replace part number 601843488 when replacing the Kalrez disk. |
| 601843488 | Silicone disk used in the pulse damper. Typically replaced by factory trained technicians. When replacing the Silicone disk also replace part number 601843487. |
| 602134145 | Prime Tube Assembly |
| 603878074 | Drop Former Assembly |
| 605204051 | Injection Valve |
| 605234018 | Companion & Rf flow cell (will not work with the XL) |
| 605234032 | This Diverter valve is obsolete use part # 605237030 |
| 605234033 | Waste Line Assembly |
| 605234034 | A Inlet Filter Assembly |
| 605234035 | B Inlet Filter Assembly |
| 605234039 | Replacement Solid Sample Tubing Line |
| 605234043 | Companion pump head A |
| 605234044 | Companion pump head B |
| 605234057 | Reddish-Orange Luer connector assembly, connects to the top of the column |
| 605235002 | Companion hard drive with peaktrak software installed |
| 605237008 | Adjustable sample cap fits 5g solid sample cartridges |
| 605237009 | Adjustable solid sample cap for 25g solid sample cartridges |
| 605237010 | Adjustable solid sample cap fits 65g solid sample cartridges |
| 605237030 | Companion diverter valve replaces part number 605234032 |
| 605248001 | Deuterium Lamp for Companion |